FCX558 da tasheet number: ds33059 rev. 4 - 2 1 of 6 www.diodes.com november 2012 ? diodes incorporated FCX558 a product line o f diodes incorporated 400v pnp silicon planar high voltage transistor in sot89 features ? bv ceo > -400v ? i c = -200ma high continuous current ? low saturation voltage v ce(sat) < -200mv @ -20ma ? complementary npn type: fcx458 ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sot89 ? case material: molded plastic. ?green? molding compound. ? ul flammability rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte ti n plated leads, solderable per mil-std-202, method 208 ? weight: 0.05 grams (approximate) ordering information (note 4) product marking reel size (inches) tape width (mm) quantity per reel FCX558ta p58 7 12 1,000 notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com for more in formation about diodes incorpor ated?s definitions of halogen and antimony free, "green " and lead-free. 3. halogen and antimony free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm to tal br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com. marking information p58 = product type marking code top view device symbol top view pin out sot89 c e c b c e b p58
FCX558 da tasheet number: ds33059 rev. 4 - 2 2 of 6 www.diodes.com november 2012 ? diodes incorporated FCX558 a product line o f diodes incorporated maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol limit unit collector-base voltage v cbo -400 v collector-emitter voltage v ceo -400 v emitter-base voltage v ebo -7 v continuous collector current i c -200 ma peak pulse current i cm -500 ma thermal characteristics characteristic symbol value unit power dissipation (note 5) p d 1 w thermal resistance, junction to ambient air (note 5) r ja 125 q c/w thermal resistance, junction to leads (note 6) r jl 10.01 q c/w operating and storage temperature range t j, t stg -65 to +150 q c notes: 5. for a device surface mounted on 15 mm x 15mm fr4 pcb with high coverage of single sided 1 oz copper, in still air cond itions; device measured when operating in steady state condition. 6. thermal resistance from junction to solder-point (on the exposed collector pad). thermal characteristics and derating information 0 25 50 75 100 125 150 0.0 0.2 0.4 0.6 0.8 1.0 derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 20 40 60 80 100 120 transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t amb =25c pulse power dissipation pulse width (s) max power dissipation (w)
FCX558 da tasheet number: ds33059 rev. 4 - 2 3 of 6 www.diodes.com november 2012 ? diodes incorporated FCX558 a product line o f diodes incorporated electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ. max unit test condition collector-base breakdown voltage bv cbo -400 - - v i c = -100a collector-emitter breakdown voltage (note 7) bv ceo -400 - - v i c = -1ma emitter-base breakdown voltage bv ebo -7 - - v i e = -100a collector cutoff current i cbo - - -100 na v cb = -320v emitter cutoff current i ebo - - -100 na v eb = -5v emitter cutoff current i ces - - -100 na v ces = -320v dc current transfer static ratio (note 7) h fe 100 100 15 - - - - 300 - - i c = -1ma, v ce = -10v i c = -50ma, v ce = -10v i c = -100ma, v ce = -10v collector-emitter saturation voltage (note 7) v ce(sat) - - - - -0.2 -0.5 v i c = -20ma, i b = -2ma i c = -50ma, i b = -6ma base-emitter saturation voltage (note 7) v be ( sat ) - - -0.9 v i c = -50ma, i b = -5ma base-emitter turn-on voltage (note 7) v be ( on ) - - -0.9 v i c = -50ma, v ce = -10v transitional frequency f t 50 - - mhz i e = -10ma, v ce = -20v f = 20mhz output capacitance c obo - - 5 pf v cb = -20v, f = 1mhz, switching times t on - 95 - ns i c = -50ma, v c = -100v i b1 = -5ma, i b2 = -10ma t off 1600 notes: 7. measured under pulsed conditions. pulse width 300 s. duty cycle 2%.
FCX558 da tasheet number: ds33059 rev. 4 - 2 4 of 6 www.diodes.com november 2012 ? diodes incorporated FCX558 a product line o f diodes incorporated typical electrical characteristics (@t a = +25c, unless otherwise specified.)
FCX558 da tasheet number: ds33059 rev. 4 - 2 5 of 6 www.diodes.com november 2012 ? diodes incorporated FCX558 a product line o f diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. sot89 dim min max a 1.40 1.60 b 0.44 0.62 b1 0.35 0.54 c 0.35 0.44 d 4.40 4.60 d1 1.62 1.83 e 2.29 2.60 e 1.50 typ h 3.94 4.25 h1 2.63 2.93 l 0.89 1.20 all dimensions in mm dimensions value (in mm) x 0.900 x1 1.733 x2 0.416 y 1.300 y1 4.600 y2 1.475 y3 0.950 y4 1.125 c 1.500 y1 x1 y2 y c x (3x) y3 y4 x2 (2x) e h d1 b1 b e c l a d 8 (4x) h 1 r 0 . 2 0 0
FCX558 da tasheet number: ds33059 rev. 4 - 2 6 of 6 www.diodes.com november 2012 ? diodes incorporated FCX558 a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com
|
